Concrete Slab Installation Fort Smith AR | Garage & Shop Floors

Concrete Slab Installation

A concrete slab is the foundation of anything built on it. Whether you're adding a garage, a workshop, a storage building, or an equipment pad, the slab needs to be engineered and built correctly for its intended use. We don't guess — we build every slab to hold what you're putting on it for the long term.

From residential garage floors to commercial equipment pads, we bring the same standard of base prep, reinforcement, and quality mix to every slab we pour.

Request a Free Estimate

Our Slab Services

We pour slabs for a wide range of residential and commercial applications across Western Arkansas.

✓

Garage Floor Slabs — Residential and commercial garage floors built to handle vehicle traffic and heavy loads.

✓

Shop & Workshop Floors — Properly reinforced floors for workshops, auto shops, and light industrial use.

✓

Storage Building Pads — Solid foundations for pole barns, storage buildings, and outbuildings.

✓

Equipment & Machinery Pads — Heavy-duty slabs engineered for the specific load requirements of your equipment.

✓

Agricultural Slabs — Barn floors, feed pads, and farm structure foundations.

What Makes a Quality Slab

Most slab failures trace back to two things — inadequate base preparation and wrong thickness for the load. We don't cut corners on either. Here's what goes into every slab we pour:

Correct Thickness

4" standard for foot traffic and light loads. 5"–6" for vehicles and heavy equipment. We specify what the job requires.

Proper Reinforcement

Wire mesh or rebar selected based on your specific load requirements — never guessed at.

Vapor Barrier

Installed under all interior slabs to prevent moisture migration up through the floor.

4,000 PSI Concrete

Stronger than the standard mix — harder, denser surface that resists cracking and surface wear far longer.

Our Step-by-Step Installation Process

Every Wagner Concrete project follows the same proven process. No shortcuts. No guesswork. Just quality work built to last.

STEP 1

Site Assessment

Evaluate the site and determine required thickness, reinforcement, and drainage for your specific use case.

STEP 2

Excavation & Grade

Excavate to required depth and establish proper grade and drainage away from structures.

STEP 3

Base & Vapor Barrier

Install and compact gravel sub-base. Add vapor barrier for all interior slabs.

STEP 4

Reinforcement

Install rebar or wire mesh at proper elevation using plastic chairs — never resting on the ground.

STEP 5

Form Setting

Set forms to exact dimensions and verify level and square before the pour.

STEP 6

Pour the Concrete

Pour 4,000 PSI concrete, screed to grade, and float the surface.

STEP 7

Finish & Joint

Apply trowel or broom finish based on intended use. Cut control joints at proper spacing.

STEP 8

Cure & Inspect

Apply curing compound, allow proper cure time before loading, and conduct final walkthrough with you.

Request a Free Estimate

What Our Clients Are Saying

From the first call to the final walkthrough — here's what our customers say about working with Wagner Concrete.

★★★★★

"Wagner Concrete did an outstanding job. Professional, on time, and the finished product looks incredible. Couldn't be happier with the results."

Fort Smith, AR Homeowner

★★★★★

"From the estimate to the final walkthrough, everything was smooth and professional. The crew was respectful and the work is exactly what we wanted."

Van Buren, AR Homeowner

★★★★★

"Best contractor experience I've had. They explained everything upfront, showed up when they said they would, and the quality of the work is top notch."

Greenwood, AR Homeowner

★★★★★

"Fair on price and excellent on quality. Wagner Concrete was easy to work with from start to finish. Will absolutely hire them again."

Barling, AR Homeowner

Got Questions?

Frequently Asked Questions

Regular passenger vehicles after 7 days. Heavy trucks and equipment should wait the full 28-day cure period for maximum strength.

A standard residential garage slab should be a minimum of 4 inches thick. For heavier vehicles or equipment storage, 5–6 inches is recommended. We assess your specific situation and recommend the right thickness.

For most residential garage and storage slabs, wire mesh provides adequate reinforcement. For heavy equipment, machinery pads, or commercial applications, rebar is the better choice. We specify the right reinforcement for every project.

Yes. We install polyethylene vapor barriers under all interior slabs to prevent moisture from migrating up through the floor. Standard practice on every interior slab we pour.

Trowel finish is smooth — better for workshops and interiors where you want an easy-to-clean floor. Broom finish has texture for traction — better for garage floors and exterior slabs that may get wet.

Yes. We form slabs around existing walls, posts, drains, and utility penetrations. We'll assess the site during the estimate and plan accordingly.

We use 4,000 PSI on all slab work — stronger than standard. For heavy equipment pads and commercial applications, we spec 4,500–5,000 PSI based on load requirements.

Yes. Wagner Concrete Co. LLC is a licensed Arkansas contractor with full general liability insurance on every project. Happy to provide proof before work begins.

Let's Get Started

Get Your Free Slab Estimate

Fill out the form and we'll be in touch within 24 hours. We come to your site, assess the job, and give you a detailed written quote.

Free on-site estimate — we come to you
Detailed written quote same day
Proper engineering for your specific use
Licensed, bonded & fully insured
Serving Fort Smith & Western Arkansas

Concrete Slabs | Fort Smith, AR